BMX-III/AMX Modules

BMX-III Line w/Poly Carb faceplate
Qty: 150

Here is the new Poly Carb faceplate installed. Make your worn BMX modules look new again.

$55.00

12 Station Selector BMX-III/AMX
Qty: 100

Here is the proto-type of the replacemnt for the old switch selector. This new module routes the audio through long life cycle surface mount relays. The momentary buttons are pressed to select the desired audio source to the monitor module audio input. At power-up, the user can install jumpers to a desired source, 1 through 12.

$350.00

BMX-III AMX 12 station selector
Qty: 100

Here is the proto-type of this new PC board assembly designed to replace the old mechanical 12 station audio switch. 12 Volt logic voltage is taken from the BMX-III/AMX Control Room module with a 2 wire plug-in cable. This provides power for the LED position indicators, the surface-mount relays and the CMOS logic. Upon power-up the user can s

$350.00

MTX switcher to replace mechanical RLS
Qty: 25

Here is our new replacement switcher for the BMX-III RLS mechanical switcher. It is based on the 12 station Monitor selector we now use for the BMX-III/AMX Control Room module. This 10 X 2 switcher uses simple CMOS logic to select the stereo input and routes it to the Stereo output. The LED in each button indicates which input has been chosen.

$345.00

BMX-III RLS switcher by MOORETRONIX
Qty: 10

Here is the release of our scaled down 10 station switcher for the BMX-III RLS console positions. We supply the mounting screws and insulator necessary for installation. Simply remove the 3 mounting screws from the old mechanical PC board and re-install the new PC board to the faceplate assembly. The photo shows the cable assembly required to connect +12 volts to the switcher. This cable is passed through the upper module support frame. The white waffer plug is inserted into any available position on the VU meter power distribution board located behind the console meter panel. Thats it. Save the old mechanical switcher PC board as an emergency or service spare.

345.00

BMX-III CR front view with poly-carbonet faceplate
Qty: 1

Shown is our durable and easy to keep clean poly-carbonet faceplate. This module has the VCA upgrade and our 12 station relay switcher installed. This rebuilt module has new capacitors, and service or replaced switches with new square wink-eyes. We add a 6 month limited warranty. Serial 185

$1200.00

BMX-III/AMX Control Room module with upgrades
Qty: 1

Here is a rear view of serial 185 showing the VCA assembly and the 12 station relay assembly mounted over and opposite the main PC board. We add our 6 month limited warranty on this rebuilt module. New electrolytics capacitors are installed along with serviced or replaced switches with new square wink-eyes.

$1200.00

Rear view of our plate for Telos electronics
Qty: 1

This view shows the faceplate and back-up plate. The two pieces are joined with industrial strength epoxy. This provides a rigid platform for the PC boards of the Telos electronics. The price includes mounting the electronics to the panel. This faceplate needs the lens and poly carbonite overlay added to complete the assembly.

$300.00

BMX-III/AMX complete Telos panel assembly
Qty: 1

Here is the completed panel. If you want to upgrade your BMX-III/AMX console with this Telos panel we have limited quanties of the metalwork in stock. The metal faceplate is laser cut. The panel has a back-up plate to reduce flexing. We also add our poly-carbonet overlay. You send us the Telos electronics and we will mount the electronics to our faceplate assembly. We also have limited quantities of the RMX console version available for the same cost.

$300.00

Browse the inventory index below for everything you need. And be sure to return to see the latest items as our site is updated weekly.

Our goal is to exceed your expectations.

News Updates

Downloads

If you would like a large preview image of any product listed on this web site, please request it by e-mail and it will be sent to you as an e-mail attachment.
   

*Available inventory is subject to change. We do our best to keep the online inventory current, yet some items shown may be out of stock due to prior sales.
<< Back Home


Mooretronix - Broadcast & Industrial Electronics
5311 South Green Avenue
Fremont, Michigan 49412
Call today at 231-924-7818 or 800-300-0733 or
.

5,890